Netkas Pc Efi 10.6
Please post your results (success of failures) on upgrading to 10.6.3. Make sure you ass your hardware specs and what kexts you are using. Also let use know if you see any performance / stability increases.Heres mine:HardwareGigabyte GA-G31M-ES2C3.1GHZ Intel Core 2 duoChameleon RC29800 GT 1GB Inno 3D VGAKext used in EXTRAS folder:fakesmcFramebufferDisablerLegaccyALC883NullCPUPowermanagementOpenHaltRestartPlatformUUIDResults:Downloaded the update and ran it.
No kernel panics. After update rebooted and worked fine. No sound though. Will have to reinstall audio. I see an improvement in graphics though, must faster, snappier. Finder and System Prefs faster. Safari faster.
Network all workingUPDATE:Sound working now (ALC 883) by installing AppleHDA.kext from 10.6.2 and HDAEnabler.kext from 10.6.2.Everything working perfect. Mouse seems faster, had to slow it down in Sys Prefs.I give it a. Hardware as per sig.Updated this morning. No problems here either. Also backed up my AppleHDA kext - as most major updates replaces it with the original one. Re-installed it and sound is working. I removed the SleepEnabler kext, as Netkas warns it causes a kp again.
Hope they get a new version updated soon. I am used to sleep mode instead of shutting down. To be honest, I have not noticed much difference yet.Edit: Seems I was paranoid about the SleepEnabler kext for nothing. The 10.6.2 version does not kp in 10.6.3. Only the old 10.6.0 version does.
Happy about that!@Shardie.I use the same audio kexts as you. Modified AppleHDA with the HDEnabler. Do you get Headphone out and mic in on the front panel? I only get sound from the Built-in Output.
Which uses the rear connector only. Front audio out is dead. Weird, since both worked in Leopard with the ALC883.kext.
This is just an annoyance really, as it means I have to disconnect my home theatre line out when I need to use headphones for skype. (front mic also does not work, have to use the rear mic in). @Shardie.I use the same audio kexts as you. Modified AppleHDA with the HDEnabler. Do you get Headphone out and mic in on the front panel?
I only get sound from the Built-in Output. Which uses the rear connector only. Front audio out is dead.
Weird, since both worked in Leopard with the ALC883.kext. This is just an annoyance really, as it means I have to disconnect my home theatre line out when I need to use headphones for skype. (front mic also does not work, have to use the rear mic in). Hi there,I have almost the same hardware:Gigabyte GA-G31M-ES2C2.9GHZ Intel Core 2 duoChameleon RC4 PCEFI 10.69400 GT 512MBand so I did the 10.6.3 updatebut I did NOT back up AppleHDA.kext or any other kext.well, I ended up without audio.after some google search I found this topic.I tried some AppleHDA.kext10.6.2 that I found on the internet, but it didn`t work.so please, I have two requests:1) could you please post the AppleHDA.kext from 10.6.2 and HDAEnabler.kext that you have??2) do you have a dsdt.aml patched from this exactly mobo GA-G31M-ES2C? Please post your results (success of failures) on upgrading to 10.6.3. Make sure you ass your hardware specs and what kexts you are using. Also let use know if you see any performance / stability increases.Heres mine:HardwareGigabyte GA-G31M-ES2C3.1GHZ Intel Core 2 duoChameleon RC29800 GT 1GB Inno 3D VGAKext used in EXTRAS folder:fakesmcFramebufferDisablerLegaccyALC883NullCPUPowermanagementOpenHaltRestartPlatformUUIDResults:Downloaded the update and ran it.
No kernel panics. After update rebooted and worked fine.
No sound though. Will have to reinstall audio.
I see an improvement in graphics though, must faster, snappier. Finder and System Prefs faster. Safari faster.
Network all workingUPDATE:Sound working now (ALC 883) by installing AppleHDA.kext from 10.6.2 and HDAEnabler.kext from 10.6.2.Everything working perfect. Mouse seems faster, had to slow it down in Sys Prefs.I give it a. Hi there,I have almost the same hardware:Gigabyte GA-G31M-ES2C2.9GHZ Intel Core 2 duoChameleon RC4 PCEFI 10.69400 GT 512MBand so I did the 10.6.3 updatebut I did NOT back up AppleHDA.kext or any other kext.well, I ended up without audio.after some google search I found this topic.I tried some AppleHDA.kext10.6.2 that I found on the internet, but it didn`t work.so please, I have two requests:1) could you please post the AppleHDA.kext from 10.6.2 and HDAEnabler.kext that you have??2) do you have a dsdt.aml patched from this exactly mobo GA-G31M-ES2C?
OS X 10.6.3Hardware Compatibility. Portable Computers.This is a hardware compatibility list for portable computers. We want to keep it as accurate as possible, but please, do not entirely rely on this list when buying a portable computer. Don't forget to add how you got OSx86 running on your portable x86 computer, and to use proper English.
Please see the discussion page for proper instructions on how to input your system specs. Also, please contribute to the page, which should list a more granular view of compatibility. If your computer isn't listed, you should try it if you have a SSE2 or higher processor. Use vanilla kernel if it is supported.
ONLY add hardware that you have TESTED. Don't add hardware just because you think it might work. Please add hardware into tables. This is for 10.6.3 builds only.Please list your computers in alphabetical order by manufacturer (Asus, Acer, Dell, HP, etc)For how to edit the Wiki, please see thread. Contents.
Acer Aspire One Netbook Installed. iAtkos S3 Version 2.
Used External USB Hard drive with iAtkos restored using Disk Utility on my Mac Bootloader. AsereBLN v1.1.9 Patches Installed. /Extra directory. fakesmc. Disabler.
RTC. EVO Reboot. Sleep Enabler. Atom Kernel Drivers. AHCI SATA. Voodoo PS/2. Voodoo P-State.
Battery. Card Reader. TSC Sync. Intel VGA.
Atheros Wifi & Wired Setup NotesI don't know if it was my USB drive, or an issue with the installer, but I kept getting a kernel panic when booting installer. I installed Chameleon 2.0 on a thumb drive and just used that as a boot device, selecting my other USB drive as the boot drive and it loaded perfectly.Also needed to use a thumbdrive with the Chameleon 2.0 RC1 installed on it to get the system out of the reboot loop. Aspire 5810T. QE. Install Method: iAtkos S3 DVD + Apple 10.6.3 Update.
OS Version: 10.6.3. CPU: Intel Core 2 Duo SU9400 @ 1.4GHz. RAM: 4gb DDR3. Graphics: Intel 4500HD (works at full 1366 x 768 resolution, but no acceleration). Sound: Works after patching AppleHDA kext fully, all inputs. DVDRW Drive: Works OOB. Wired Network: Works with the AtherosL1cEthernet.kext found at.
Wireless Network: Not working yet. Bluetooth: Works OOB, activated from Fn-F3. Acer CrystalEye Webcam: Recognized by OSX as a USB webcam, however no graphic acceleration means I am unable to check its functionality. It's a matter of kext since when installing from another source the webcam turned on to take a snaphot of me. Keyboard/Trackpad: Works OOB with iatkos S3 kexts, called VoodooPS2 + trackpad, Multi-touch?(don't know how to test it).
Power Management: Battery Management working using VoodooBattery kext. Shutdown/Restart also work OOB. Sleep locks the partition, needs to be mounted+unmounted from Disk Utility (dvd).
Acer Launch Pad: Soft-Touch-sensitive volume controls/scroll wheel both work OOB. Additional Notes: Failed installing other distributions of Snow Leopard, System is very usable but battery life is shorter than Windows Vista, not benchmarked. QEPartsDeviceWorkingNotesProcessorCore 2 Duo T7100YesOut the BoxSATAHard Disk (ICH8 Family)YesOut the BoxPATADVD+/-RW (ICH8 Family)YesOut the BoxGraphicsIntel X3100YesOut the boxAudioHDA ALC268YesVoodooHDA.kextWirelessBroadcom BCM4311YesOut the BoxUSBUSB 2.0 (ICH8 Family)YesOut the BoxEthernetBroadcom BCM5787MYesPatched driver by Nobb1xBus PCIeIntel GL960/GM965YesChun-Nan´s IOPCMCIAFamily (32 bits)BatteryIntegratedYesVoodooBattery.kextFireWireRicoh R5C832YesOut the BoxCard ReaderRicoh R5C822PartiallyIOSDHCIBlockDevice.kext (32 bits)ModemIntegratedNoWho needs a modem today? Aspire 4570. QEPartsDeviceWorkingNotesProcessorCore 2 Duo T9400YesOut the BoxSATAHard Disk (ICH9 Family)YesOut the Box (AHCI method)PATADVD+/-RW (ICH9 Family)YesOut the BoxGraphicsIntel GMA 4500mhdYesNative resolution with intel X3100 drivers but NO QE/CI support!AudioHDA ALC268YesVoodooHDA.kextWirelessIntel Wifi Link 5100NoThere are no driver for this card yet!
You can replace it with a compatible one (e.g. BCM 4311)USBUSB 2.0 (EHCI Family)YesWith native Snow Leopard 10.6.2 IOUsbFamily.kextEthernetBroadcom BCM5764YesPatched driver by Nobb1xBatteryIntegratedYesVoodooBattery.kextModemIntegratedNo Aspire 5920G.
Netkas Pc Efi 10.6 Pro
Note:. Mine is the Best Buy model (I only mention this because I believe other G60JXs have slightly different H/W).
This laptop requires the MacBook Pro Software Update 1.3. Don't forget that SL requires GPT. Install Method: Install from working OSX install. Or kickstart install using ('Experimental Support for. Core i5-M, Core i3-M, Core i7M'). 1st boot using Empire.
Install 10.6.3 Combo Update if installing from earlier. Once running 10.6.3, edit SystemVersion.plist as described, then install. Install bootloader and kexts.
Edit DSDT: HPET fix (no more NullCPUPM!), SBRG/LPCB Lower temperatures hack, FN button hack. 'MacBookPro6,1' in smbios.plist (helps with PM). In c.a.B.plist: 'GraphicsEnabler'='Yes' (native NV 360M support) and 'system-type'='2' (more PM, identifies system as a laptop). Many of the necessary kexts can be found. Bootloader:. Kernel: Vanilla 10.3.1 in 32-Bit Mode, 64 also works, with the exception of PS2 keyboard and trackpad (32-bit only driver).
Small interjection: iATKOS S3 somehow works in 64-bit mode with trackpad and keyboard; yet to find out how. Kexts: for use with meklort's; meklort's ApplePS2Controller/Pref pane - same link (32-bit only:( ); iats; netkas';; slice/AutumnRain's (Voodoo project's also needed, to save settings). Issues: Sleep. Sound device names require Info.plist edit; jack sense works OOB.
With, all but keyboard backlight controls work. Cardreader needs additional kext available from.
Netkas Pc Efi 10.6 Free
Other: Full PCI-ID list. More detailed install guide.PartDeviceWorkingNotesProcessorIntel Core i5-430MYesVanilla 10.3.1. Both cores, all threads.
'cpus=1' not needed.ChipsetIntel HM55 ExpressYesNative with MBP 1.3 UpdateSATAIntel HM55 ExpressYesNative with MBP 1.3 Update. ESATA also works.GraphicsNVIDIA GeForce GTS 360MYesNative with MBP 1.3 Update - Native panel res (1366x768), full acceleration (QE), VGA, HDMI, multi-display; 'GraphicsEnabler' in c.a.B.plist is all that's needed.AudioIntel HDA Controller / Realtek ALC663 HDA codecYesVoodooHDA rewrite by slice and AutumnRain with plist edit.
Jack sense works. No S/PDIF or HDMI audio. Installation: In Info.plist, replace 'IOPCIClassMatch' key/string with 'IOPCIMatch', '0x3b568086'WirelessAtheros AR9285 Wireless Network Adapter (b/g/n)YesWorks with a.EthernetAtheros AR8131 PCI-E Gigabit Ethernet ControllerYesAttansic / Atheros L1C for Snow Leopard (AtherosL1cEthernet)USB EHCI & UHCIIntel HM55 ExpressYesNative supportTrackpadSynaptics PS/2 Port Compatible TouchPadYesMeklort's ApplePS2 and pref pane, AppleACPIPS2Nub. Tap, multi-finger gestures.WebcamChicony CNF71297 (USB 2.0 1.3M UVC WebCam)YesNative supportBatteryIntegratedYesVoodooBattery for menu bar displayCard readerRicoh R5U230 PCIe Memory Stick Host Controller / R5U852? PCIe xD-Picture Card Controller / R5U822 PCIe SD/MMC Host Controller (SDA Standard Compliant SD Host Controller)YesUsing modified IOSDHCIBlockDevice.kext. Available in 's Extra folder.FirewireRicoh R5U832 PCIe IEEE1394 Firewire Host Controller?Untested (no firewire devices in this house:) ) 'Total Gaming Power on the Go'. QE.
Install Method: Download and Flash mine Modded BIOS Install from DVD iAtkOS S3 v2 and select this Options:. Bootloader: Chameleon V2 RC4. Kernel: qoopz 10.3.0 in 32-Bit Mode. Kexts:.
Issues: When i have pressed FN+F8 the Monitor doesn't work. QEInstall Snow Leopard 10.6.3 using mosslack's install guide atSee also, For MBR partition Scheme. Atom 330 Dual Core works with patched kernel. x8664 kernel. Hyperthreading. Sound works with patched VoodooHDA. Mic Works.
Graphics @ 1366x768. Full GPU accleration (QE/CI). 1080p playback. HDMI out works without sound. Must use line out w/HDMI. Camera works.
SD card reader works. Function Keys for Brightness, monitor on-off, Volume, etc` (Fixed using Meklort's Asus HotKeys.kext). Trackpad works with multi-touch gestures.
Sleep. Restart/shutdown (with evoreboot.kext). Bluetooth (on/off with BroadcomUSB270Injector.kext). AHCI.
Onboard ethernet. Netflix streaming (use latest version of Silverlight)- Not Working: WiFi ( Wifi card my be replaced by a Dell 1510 half mini PCI-E card or a Realtek8191su USB dongle) G51JX - 3D 'Republic of Gamers'. QE. STANDARD MODEL. Install Method: Install using a large USB (8GB) because DVD doesn't work whit kickstart (recognized like HDD). Install using to boot and insert the USB flash then hit F5, then install normally('Experimental Support for Core i5-M, Core i3-M, Core i7M').
1st boot using Empire. Install 10.6.4 Combo Update. Once running 10.6.4, Install bootloader and kexts using 'My Hack'. Graphics enable: Yes and PciRoot 0 graphics. Bootloader: same use in My Hack. Kernel: Work only machkernel of Efi boot disc, look under extra and the 'name.dmg'open it an found the kernel use that and it will work.
Kexts: Use the default options of My Hack; iats, slice/AutumnRain's (Voodoo project's also needed to save settings). Wireless.
QEInstall Snow Leopard 10.6.3 using mosslack's install guide atSee also. Atom 330 Dual Core works with patched kernel. x8664 kernel. Hyperthreading. Sound works with patched VoodooHDA.
Mic Works. Graphics @ 1366x768. Full GPU accleration (QE/CI). 1080p playback.
HDMI out works without sound. Must use line out w/HDMI. Camera works.
SD card reader works. Function Keys for Brightness, monitor on-off, Volume, etc` (Fixed using Meklort's Asus HotKeys.kext). Trackpad works with multi-touch gestures. Sleep.
Restart/shutdown (with evoreboot.kext). Bluetooth (on/off with BroadcomUSB270Injector.kext). AHCI. Onboard ethernet. Netflix streaming (use latest version of Silverlight)- Not Working: WiFi ( Wifi card my be replaced by a Dell 1510 half mini PCI-E card or a Realtek8191su USB dongle)PartDeviceWorkingNotesProcessorIntel Core i5-430MYesVanilla 10.3.1.
Both cores, all threads. 'cpus=1' not needed.ChipsetIntel HM55 ExpressYesNative with MBP 1.3 UpdateSATAIntel HM55 ExpressYesNative with MBP 1.3 Update.
ESATA also works.GraphicsNVIDIA GeForce GTS 360MYesNative with MBP 1.3 Update - Native panel res (1366x768), full acceleration (QE), VGA, HDMI, multi-display; 'GraphicsEnabler' in c.a.B.plist is all that's needed.AudioIntel HDA Controller / Realtek ALC663 HDA codecYesVoodooHDA rewrite by slice and AutumnRain with plist edit. Jack sense works. No S/PDIF or HDMI audio. Installation: In Info.plist, replace 'IOPCIClassMatch' key/string with 'IOPCIMatch', '0x3b568086'WirelessAtheros AR9285 Wireless Network Adapter (b/g/n)NoNo driverEthernetAtheros AR8131 PCI-E Gigabit Ethernet ControllerYesAttansic / Atheros L1C for Snow Leopard (AtherosL1cEthernet)USB EHCI & UHCIIntel HM55 ExpressYesNative supportTrackpadSynaptics PS/2 Port Compatible TouchPadYesMeklort's ApplePS2 and pref pane, AppleACPIPS2Nub. Tap, multi-finger gestures.WebcamChicony CNF71297 (USB 2.0 1.3M UVC WebCam)YesNative supportBatteryIntegratedYesVoodooBattery for menu bar displayCard readerRicoh R5U230 PCIe Memory Stick Host Controller / R5U852? PCIe xD-Picture Card Controller / R5U822 PCIe SD/MMC Host Controller (SDA Standard Compliant SD Host Controller)NoNo driver (VoodooSDHC didn't work)FirewireRicoh R5U832 PCIe IEEE1394 Firewire Host Controller?Untested (no firewire devices in this house:) ) eeePC X101HMac OS X Snow Leopard Retail 10.6.3 has to be used. OS X 10.6.0 will install but mouse/trackpad impossible to use correctly.
GUID only, dualboot possible with NBI and correct partitioning. QEPartsDeviceWorkingNotesProcessorIntel Atom N455 1.66 GhzYesSATAHard DiskYesOOBGraphicsIntel GMA 3150No/YesRuns only in 800x600. To enable full 1024x600 resolution you have to use NBI that patches the GMA 950 kext. No QE/QI.AudioYesVoodoo HDA 2.7.2, mike's not workingWirelessAtheros AR9285 802.11b/g Wireless Network AdapterNo/YesTo enable Wifi you have to install new kexts.USBICH7 FamilyYesOOBEthernetAtheros L1c AR8152 v2.0No/YesEthernet works only when new kext is installed and Wifi kext is not installedBatteryIntegratedNot testedWeb CameraIntegratedYesOOBCard ReaderIntegratedNot testedInstallation process:Mac OS X Snow Leopard Retail 10.6.3; Update to 10.6.6; Install kexts (look up).For more information look up EEE PC 1000HE. QEInstall Method: Install 10.6.0 (also works for 10.6.1) using the method here:.
Since Windows 7 was installed before Snow Leopard this particular instance with the intention of dual-booting, the osinstall.mpkg swap-out hack was performed, described here:. Make a note of partition sizes.
All parts bold in this section pertain to dual-booting. Since I never had any luck with NetbookInstaller, I did everything that it did manually (dropping KEXTs that worked in the Extra/Extensions folder, building the Extensions.mkext with Kext Utility, editing the com.apple.boot.plist file with the edits mentioned in the table, dropped the Atom Mach Kernel in the root of the drive, assembled a patched DSDT (coming in a future bundle), and installed the latest version of Chameleon 2. The update to 10.6.2 went painlessly (just execute the update bundle ), the same went for 10.6.3. After installing and updating, your Windows boot will be messed up. To fix it, you will need a USB optical drive. Put your Windows 7 disk into the drive, boot from it, click through the wizard until it displays 'Install Now'. Instead of clicking that, click 'Repair My Computer'.
It will scan for a Windows install and not find one (the one it's looking for is not on an 'active partition'). Click through to get to the tools, then click on the Command Prompt link.
Then, type out the codes in this sequence:. Diskpart. list disk. select disk # (the number that matches the size of the internal hard drive, pretty much always 0, though I had it listed at 1 at one point). list partition.
select partition # (the partition you installed WINDOWS on). make activeThat will make the Windows partition the bootable partition.
After this, restart and boot from the optical drive again. Go through the wizard again and click on 'Repair My Computer'. This time, Windows will find the install on the hard drive and repair it.
If it can't fix it once, reboot and do it again. It will get fixed. Anyway, after it's fixed; reboot again and boot from the optical drive.
Get to the Command Prompt by the same process as I described above. Type out the same commands as above but make sure to select the MAC OS X partition and make it active. Then, reboot and boot from the hard drive. Hopefully you'll see the slightly-more-awesome Chameleon boot menu instead of that drab Windows boot menu. PartDeviceWorkingNotesProcessorIntel Atom N280 Single Core HyperthreadedYesSpeedstepping technology works as well! Make sure to use the kernel patched for the Atom series if you don't rely on NetbookInstaller to do it for you (this is listed as an unsupported device)ChipsetIntel 945GSEYesSATAIntel 945GSEYesGraphicsIntel GMA 950YesNative with Mac OS X - Native panel res (1024x600), full acceleration (QE), 'GraphicsEnabler' Yes, GMA 950 string injectionAudioRealtek HDA Controller / Realtek ALC663 HDA codecYesLatest version of VoodooHDA.kext works. The microphone does not however, but I have no interest in using it.WirelessAtheros AR928X Wireless Network Adapter (b/g/n)YESNatively supported.
The European model may differ as I heard they used a different network chip.EthernetAtheros AR8131 PCI-E Gigabit Ethernet ControllerYesAttansic / Atheros L1C for Snow Leopard (AtherosL1cEthernet)USB EHCI & UHCIIntel 945GSEYesNative supportTrackpadSynaptics PS/2 Port Compatible TouchPadYesInstall VoodooPS2.kext before booting on the EEE for keyboard/trackpad support. Hotkeys will not work (except for brightness adjustment)WebcamChicony CNF71297 (USB 2.0 1.3M UVC WebCam)YesNative supportBatteryIntegratedYesCard readerYesNative support (even SDHC) F5SLInstall iAtkos S3 V2 adding the following options:. Bootloader Options.
Graphics Enabler.pci1. Drivers. Main Hardware. SATA/IDE. VIA SATA.
PS/2. VoodooPS/2 or Apple PS/2 (whichever you prefer, though voodoo PS/2 supports two finger scrolling)You can experiment with different ATI drivers, but they never made a difference to me. Display works, but graphics performance isn't great, so I don't think it's properly hardware accelerated.Whatever you do, DO NOT install any networking drivers, it may just be me but every time I install ethernet/wireless drivers it always leads to a crashy installation. Also for some reason if I boot in 32 bit mode, airport is still enabled and hence causes crashing, so you'll have to avoid 32 bit mode.For internet I'm running a Realtek RTL8188SU, some drivers I've found have crashed in 64bit mode, but I found one that works in which is apparently for the Airlink 101. When you plug the dongle in, for me it crashes if I try to use airport to do anything, so I have to connect to wireless networks and set up profiles etc using the Airlink utility.Graphics Enabler and pci=1 seem to make graphics reasonably supported - ie Photo booth seems to working, whereas I got a black screen before hand.
However I still have no joy with VLC and the like.I've installed Flash player and tried browsing Flash content with a few browsers, safari and chrome seem to crash instantly, but Firefox seems to work OK.Feel free to update to 10.6.5 using software update.Not the best laptop for hackintosh, but it can be done!After installation download RadeonHD.10.6.x.kext from insanelymac forum. Install it with Kext Utility, reboot with flag -f (for sure). I've got my resolution working (1280x800) and my video card recognized as ATI Mobility Radeon HD 3400 (not 3470), but was problem with cursor. Just follow instructions on previous linked page - 'In RadeonHD.kext/Contents/Info.plist, set 'EnableHardWareCursor' to false. Rebuild the kernel cache and reboot.' Resolution works for me only when I boot from flash drive when I have installed Chameleon RC5 bootloader, if I boot from HDD it doesn't work and have some issues with wi-fi.Safe updated to 10.6.6 with software update.
But after safari sometimes hangs up. N90svInstall using iAtkos S3 V2 adding the following options:Used similar options as for F5SL.YOU CAN USE SOFTWARE UPDATE FOR EVERYTHING (INCLUDING TO 10.6.5) EXCEPT ITUNES. FOR SOME REASON WHICH I HAVEN'T WORKED OUT WHY YET, ITUNES 10.1.1 STOPS SNOW LEOPARD FROM BOOTING. SO DON'T UPDATE IT UNLESS YOU KNOW HOW TO FIX IT.
Bootloader Options. Graphics Enabler.pci1. Drivers. Main Hardware. SATA/IDE.
VIA SATA/IDE. PS/2.
VoodooPS/2. Sound. Voodoo HDA (IMPORTANT: make sure only one audio kext driver is selected for installation.or you might get a kernel panic after installation). Laptop Hardware. Battery. Card Reader. TSC Sync.
NTFS-3GIt took me a couple of times to get the installation to go through completely. When I did get iAtkos 10.6.3 v2 dvd to go through (install) completely, it said that it had failed. However When I rebooted the laptop it worked!!!!!!!! Thus I suggest making sure to burn the install disc at a very low speedWORKING:. nVidia GT130M Video Card: (Full Resolution of 1920x1080 with QE/CI) (works with Graphics Enabler option and -pci1 option checked).
Audio (very clear actually) (works with Voodoo Sound). Atheros AR928x Wifi:(works OOTB). SiS191 Lan: not sure yet haven't checked. Chipset - SiS 671DX+968: Works with the Via SATA/IDE kext driver.
PS/2 Keyboard and Mouse: Works with Voodoo PS/2 kext driver. webcam works OOTB but shows upside down.
QE. Install Method: iBoot+Osx Snow Leopard 10.6.3 ISO. OsX Version: 10.6.3 - iBoot. CPU: Intel i7 720QM @ 1.60GHz - Quad Core. Graphic card: ATI Mobility 4670 - Only output is via DisplayPort port, can't get desktop on internal screen.
RAM: 2x4 Gb DDR3, OSX only sees 4GB. (bootloader uses maxmem=4096 kernel flags). Hard disk: 256GB Samsung SSD. DVD-RW: Works out of the box.
LAN: Intel - doesn't work out of the box, not tried any kexts yet. Firewire: Seen by system, not tried any devices yet. Keyboard/Trackpad: Works, not tried trackpad prefs yet. Sound: Intel: Works out of the box.
Netkas Pc Efi 10.6 Torrent
Wireless: Intel: Doesn't work, not tried any kexts yet. Bluetooth: Doesn't work, not tried any kexts yet. RICOH 3 in 1 Card Reader: Not tested. Power management: Doesn't sleep. Not tried any kexts or fixes yet.
ShutDown/Reboot: Works, but looses CMOS settings. Kext used: None. Thread / knowledge collection: Inspiron 1420. Install Method: iAtkos S3 v2. Chipset: Intel.
Processor: Intel Core 2 Duo T7500. Audio: Model: VoodooHDA 2.5.2. LAN: Ethernet. Video: OBO. How to install: Follow this EXACTLY. Boot iAtkos s3 v2 using -v. Once loaded, partition using GUID.
Click on customize and choose the following. YOU WILL HAVE TO DESELECT SOME OF THE DEFAULT ONES. Only select the ones listed.Bootloader: Chameleon v2 RC4Bootloader Options: EthernetPatches: /Extra Directory, FakeSMC, Disabler, EVO RebootDrivers: Apple PS/2, Battery and Card Reader (Under Power Management) and Broadcom (wireless).No need to install NTFS-3G, Snow Leopard natively supports NTFS read/write. You can activate it from terminal. Inspiron 1545 Install Method: iAtkos S3 v2Processor: Intel Core 2 Duo T4500How to install: same as inspiron 1420. Follow this EXACTLYBoot iAtkos s3 v2.
Once loaded, partition using GUID. Click on customize and choose the following. YOU WILL HAVE TO DESELECT SOME OF THE DEFAULT ONES. Only select the ones listed.Bootloader: Chameleon v2 RC4Bootloader Options: EthernetPatches: /Extra Directory, FakeSMC, Disabler, EVO RebootDrivers: SATA AHCI, Apple PS/2, VoodooHDA Audio, Battery, Card Reader and Broadcom (wireless). Inspiron e1705. QE. Install Method: iBoot + SnowLeopard 10.6.3 Retail DVD.
OsX Version: 10.6.3 retail disk. CPU: Intel Core i5 Dual Core with HT/2.4GHz (all cores recognized) OOTB. Graphic card: Nvidia NVS 3100M 512MB, work somewhat natively, you can get full QE/CI if you add GraphicsEnabler=Yes to the boot.plist file. Display port for external monitor working OOTB. RAM: 4GB DDR3 1066MHz. Hard disk: 250Gb WD SATA.
(in AHCI mode of course). DVD-RW: Works out of the box. LAN: Works out of the box.
Keyboard/Trackpad: Works with basic functionality (no two finger touch etc.) use usb keyboard and mouse for the setup, then install the PS/2 1000.kext using kext wizard. Sound: Sigmatel 9200: VoodooHDA. Wireless: Does not work. Replaced card with a Dell DW1397 (Like 6 dollars shipped on eBay) and it works fine, although it is only wireless G. Alternatively, a USB dongle could be used.
Bluetooth: Works out of the box. Power management: Works, battery indicator works fine. ShutDown/Reboot: Shut down does NOT work. You have to hold the power button down to turn off.
NOT WORKING PARTS: Original WiFi card, Card ReaderInstallation= Pretty straightforward. Boot with iBoot, put SnowLeo DVD in, run through the disk utility, then install. It will say Installation failed, but just reboot it with the iBoot cd in. Choose the HD you just installed to,(putting in any boot options you want, I recommend GraphicsEnabler=Yes), let it boot up, run kext wizard for necessary kexts (you can actually google dell e6410 kexts and obtain them very easily). You will also need toinstall chimera to enable booting without the iBoot disc. You have a fully functional Dellbook Pro.
I haven't tried doing the combo update to 6.8 so I am not entirely sure that will work. One side note:This hackintosh will ONLY WORK IF YOU HAVE THE NVIDIA NVS 3100M model. Otherwise, you are out of luck.accusourceit@gmail.comemail me if you have questions HP Pavilion DV2000 (DV2268EA).
QE. Install Method: iAtkos S3V2 (install with no hassles). bootloader: Chameleon 2.1 RC5 tested, C & P states enabled.
Kernel: default (machkernel). Kexts: VoodooPS2, AppleIntel8255x, VoodooSDHC, VoodooHDA, VoodooBatteryHardware NameDetailsNotes32/64bit working with patchesProcessorCore 2 Duo T5500both cores working, Sleep and Speedstep working after DSDT mods.ChipsetIntel ICH7Works Out of the BoxGraphics CardNVidia GeForce Go7200QE/CI Working OOB. GraphicsEnabler=Yes or with NVEnabler (recognizes second monitor).